ALUMINUM ARBOR PLATE FOR 6 TON A FRAME PRESS FOR MAKING COIN RING TOOLS

Description

This is a round aluminium arbor plate to be used with a 6 ton A frame hydraulic press in the place of the two steel plates that came with your press. This plate is machined with a 2 inch recess in the middle with a center hole all the way through the plate so everything is always lined up. It comes with two bushings. With the bushings you can use dies that have 2 inch 1.75 inch or 1.5 inch outside diameters. This plate has 6 inches outside diameters and is 1.25" thich. Using this plate you only lose about 1/8" clearance in your press.
This plate works great with SW dies also. It keeps the die directly over the hole so you will not have a problem with your ring hitting sides or bottoming out. Works with SW dies with 2 inch, 1.75 inch or 1.5 inch diameter.
Auction is for aluminum arbor plate and 2 bushings only.
Mikestilltools
To see all my tools do a search for seller:mikestilltools
NOTE
:
All
my
tools
are
made
to
order
in
my
shop
at
my
house
.