5 SWEDISH WRAP DIES @ 7° FOR COIN RING TOOLS PLUS 11 PUSH RODS

Description

This is a coin ring die set of 5 dies and 11 push rods. These dies are made to do the Swedish Wrap Method. The inside angle is 7 degrees. My other SW die set is machined at 5 degrees.
Also with 5 different sized dies instead of just 2 or 3, you have more sizes to work with if you do push the coin all the way thru the die. That makes it easier to get the size ring you need.  You will still need a fold over die to start the process of making a ring.
The larger die in this set is approximately 1.4" at the top and 1.15" at the bottom.
Next is 1.3" at top and 1.05" at bottom.
Next is 1.2" at top and .95" at bottom.
Next is 1.1" at top and .85" at bottom.
Last is 1" at top and .75" at bottom.
These SW dies are approximately 1-1/8" tall.
These dies are hardened and the inside of the die is polished very smooth.
The push rods are made out of aluminum so there is less chance you will damage your dies if you press the push rod to far down. The push rod sizes are 1-5/16" 1-1/4" 1-3/16" 1-1/8" 1-1/16" 1" 15/16" 7/8" 13/16" 3/4" and are 1-3/8" tall.
Auction is for 5 dies, and 11 aluminum push rods.
Mikestilltools
To see all my tools do a search for seller:mikestilltools